911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
/f6-3.6l/Page-428001.png)
Balance Shaft: Service and Repair
Puller for bearing cover for intermediate shaft
9673 - Puller for bearing cover for intermediate shaft
Application
1. Carry out preparatory work.
2. Unscrew M8 hexagon collar nut on the bearing cover of the intermediate shaft with special tool socket wrench 9110, while at the same time
countering the slotted threaded pin on the intermediate shaft with a suitable screwdriver.
