911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
/f6-3.6l/Page-1286003.png)
1. Position sensor and secure with the fastening screws.
Tightening torque: 10 Nm (7.5 ftlb.).
2. Connect electrical plug connection.
3. Position the support and engage in lower side member.
4. Push in the locating peg -1- of the support and check that it is sitting correctly.
5. Tighten the fastening nuts -3- and the fastening screws -2-.
Tightening torque -2- 7.2 Nm (5.5 ftlbs.).
