911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
6. From the passenger's side, undo the shear-off nuts and M6 hexagon nut and remove the ignition unit.
Installing triggering unit for airbag
NOTE:
-
The fastening points on the body must be metallically bright.
-
Use a 1/4 inch Allen key to tighten the shear-off nuts.
-
A new triggering unit must be locked after it has been installed.
Tightening torque of the M6 hexagon nut: 10 Nm (7.5 ftlb.)