911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
4. Loosen screw connection between spring strut/wheel carrier (arrow). Pull out (remove) spring strut.
Installation
1. Install in reverse order. Before installing, give the parts a visual check. Replace fastening nuts.
2. Do not grease screwed connections in Dacromet finish - aluminium color. Use correct tightening torques.
3. Insert spring strut into vehicle. Before tightening the fastening nuts, adjust spring strut mount in accordance with the applied marking (position of
the three fastening nuts). Tightening torque: 46 Nm (34 ftlb.)
4. When new parts are installed that affect vehicle height, suspension alignment must be carried out.