911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
/f6-3.6l/Page-1199005.png)
-
Fit brake disc cover and retainer plate (lid). Unless there is a water drain on both sides, fit the water drain (arrow) in the correct position - i.e.
facing downward. Use correct tightening torques. Brake disc cover = 10 Nm (7.5 ft. lbs.) Retainer plate = 37 Nm (27 ft. lbs.)
-
Press in wheel hub.
To do this, place the wheel hub on the wheel centering device and press it on the wheel bearing inner race using pressure piece VW 415 A (tool
C).
Rear Suspension
