911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Notes on removal and installation
Removal
Warning
Danger of injury and/or damage during disassembly and assembly work! The clutch boost spring can become detached on its own.
-> Before the start of disassembly work in the area of the clutch pedal lever (exception: clutch pedal switch), the clutch boost spring must be fixed
with a cotter pin (Figure 478_98).
1. Disconnect battery ground cable.
2. Remove driver's seat (to facilitate work).
3. Remove air duct (A). The air duct is plugged in.