911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
/f6-3.6l/Page-833001.png)
Differential Mount: Removal and Replacement
Removing and installing support for final drive
A - Support for final drive
B - Fastening screws
Removal
1. Remove final drive.
2. Unscrew fastening screws and remove support.
Installation
1. Fit support in the correct position (angled side facing upwards).
Information
^
At the beginning of the series, supports with tabs were installed. These supports must be fitted with the tabs facing downwards.
A - Tabs
2. Tighten fastening screws in two stages.
1st stage:
