911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-920001.png)
Tire Pressure Monitor Antenna: Procedures
Removing and installing antenna for tire pressure monitoring system
Preliminary work
1. Remove front wheel housing liner.
2. Remove rear wheel housing liner.
Removing antenna for tire Pressure monitoring System
Removing antenna of front tire pressure monitoring system
1. Switch off ignition and remove ignition key.
2. Unscrew fastening screw -1-.
3. Pull out -Arrow A- and remove antenna of tire pressure monitoring system from holder.
4. Release -Arrow a- and pull off plug and remove antenna of tire pressure monitoring system.
Removing antenna of rear tire pressure monitoring system
1. Switch off ignition and remove ignition key.
