911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-925002.png)
3. Remove the PCB -2- from the silicone pad -1-.
4. Lift up buttons (two or three, depending on the vehicle type) and pull them out of the remote control housing.
Assembling remote control
INFORMATION: The PCB should only be held carefully at the edge.
1. Engage new buttons in the remote control housing.
2. Insert PCB -2- into the new silicone pad -1-.
3. Insert silicone pad -1- with PCB into the remote control housing.
