911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
3. Unscrew the three fastening nuts -2- and take off both retaining frames.
Installing CD changer
INFORMATION: If a new CD changer is installed, the adjusting screw must be in position V.
1. Place the retaining frame onto the threaded pins and screw down using the three fastening nuts -2-. - Tightening torque: 6.5 Nm (5 ftlb.)
2. Plug the electric connectors into the CD changer until they are felt to engage.
3. Insert the CD changer into its retaining frame and screw down tight with the six fastening screws. - Tightening torque: 2.5 Nm (2.0 ftlb.)
Subsequent work
Subsequent work - CD changer