porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 4796 > < Alarm Module, (Vehicle Antitheft)|Service and Repair|Page 4791
Page 1
background image

Antenna Control Module: Procedures

918619 Removing And Installing Control Unit For Antenna

Preliminary work

Preliminary work - antenna control unit

Remove right-hand panel of centre console.

Removing antenna control unit

Install location

1. Remove ignition key and switch off audio system.
2. Undo the velcro strip on the carpet underneath the centre console.

Velcro fastening on carpet

3. Push a screwdriver under the control unit and lever it up at the front and rear.

Levering up control unit at both front and rear

4. Release the electrical connectors -A- and pull them away from the antenna control unit.
5. Take out the control unit.

Installing control module for antenna

Procedures|Page 4796 > < Alarm Module, (Vehicle Antitheft)|Service and Repair|Page 4791