911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-978002.png)
4. Unlock plug for tilt sensor control unit -Arrow a- and remove.
Installing tilt sensor control unit
Connect plug to tilt sensor control unit
1. Push plug onto tilt sensor control unit until it is felt to engage.
Tightening fastening screws for tilt sensor conrol unit
2. Check sheetmetal nuts for deformation, replacing if necessary. Push the two sheetmetal nuts -2- onto the tilt sensor control unit.
3. Position tilt sensor control unit -1- and secure with both fastening nuts. Tightening torque 3 ftlb.
Subsequent work
Install centre console cover.
