911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Front Door Exterior Handle: Overhaul
571137 Disassembling And Assembling Door Handle
Preliminary work
1. Remove door handle.
2. Remove microswitch for window opening controls.
Disassembling door handle
1. Press out circlip -1- , pull pin -2- out of the handle and remove actuating shaft -3-.
2. Pull pin rod -4- out of the handle liner -9- and separate handle -8- from the handle liner.
3. Remove return spring -6- , eccentric -5- and sleeve -7-.
4. Pull buffer -10- out of the handle -8-, check it and replace if necessary.
Assembling door handle
1. Fasten buffer -10- to handle -8-.
2. Position return spring -6-, eccentric -5-, sleeve -7- and handle -8- on the handle liner -9- and press in pin rod -4-.
3. Position actuating shaft -3- on handle. Insert pin -2- and secure pin with the circlip -1-.
Subsequent work
1. Install microswitch for window opening controls.
2. Install door handle.