porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Body - Carbon Fiber Composite Sill Guard Retrofit|Page 5286 > < Body - Carbon Fiber Composite Sill Guard Retrofit|Page 5284
Page 12
background image

9.7.1 Close both doors and then open them again.

9.7.2 Both door entry guards must light up for approx. 10 minutes.

9.8

Adhere new tire pressure label to the door entry guard on the driver's side.

9.8.1 Clean bonding surface on door entry guard to remove any dust and grease.

9.8.2 Stick new tire pressure label to the door entry guard at the same height as the original tire pressure label => Figure 26 -A-

Body - Carbon Fiber Composite Sill Guard Retrofit|Page 5286 > < Body - Carbon Fiber Composite Sill Guard Retrofit|Page 5284