911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
6.1. Switch on ignition.
6.2. Completely close hood until the locking hook -1- locks the hood compartment lid -2- (-arrows-).
6.3. Switch off ignition.
7. Adjust hood compartment lid and hinge.
7.1. Unscrew fastening nuts -1- at the hood compartment lid and fastening nuts -2- at the hinge at the left and right.
7.2. Check contours with respect to the side panels and the rear lid and adjust if necessary. Refer to Diagram - body gap dimensions
7.3. Tighten fastening nuts -1- at the hood compartment lid and fastening nuts -2- at the hinge at the left and right.
Tightening torque: 9.7 Nm (7
ftlb.)
8. Release hood compartment lid.
8.1. Switch on ignition.
8.2. Open hood until the locking hook -1- releases the hood compartment lid -2- (-arrows-).
8.3. Switch off ignition.
9. Release hood compartment lid.