911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
2. Press lugs -arrows A- and disconnect electric plug connection -2- -arrow B-.
3. Unlock connector -2- by pressing the lug -arrow C- and push out of the bracket -arrow D-.
Removing hydraulic pump
1. Move rubber holder -1- in -direction of arrow A- from the support for hydraulic pump -4-.
2. Unscrew fastening nuts -2- and take out hydraulic pump -3- from the support for hydraulic pump upwards -arrow B-.
NOTE: Lay cloth under banjo bolt before unscrewing.
3. Unscrew banjo bolts -2A, 2B- on the hydraulic pump -1- and take out hydraulic lines -A, B- with sealing rings -3, 4-.