911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-1111012.png)
2. Fold cover -3- over all the way around and remove padding -2- (-Figure B-).
Removing padding for side bolsters
NOTE: The side bolster padding will be irreparably damaged during removal and must be replaced.
1. Loosen inner padding -1- from the seat shell -2- in the bonding area -3- (-arrows A-).
2. Loosen padding -1- at the sides from the seat shell -2- (-arrows B-).
3. Remove remaining adhesive -1- and clean the contact surfaces of the seat shell -2- with cleaning agent.
