911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-1121001.png)
Power Mirror Switch: Service and Repair
665419 Removing And Installing Switch For Rearview Mirror
Removing switch for rearview mirror
1. Remove ignition key.
Unclipping switch
2. Use a plastic spatula to carefully lever the switch for the rear-view mirror out of the mount on the door panel.
Removing plug
3. Pull off electrical plug on switch.
Installing switch for rearview mirror
Connecting plug
1. Push electric plug on to switch until it clicks into place.
Clipping in switch
2. Push electric wire into the mount for the rear-view mirror switch and clip the switch into the mount.
