911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Tandem pump on right side of cylinder head
Pull the vacuum line -2- out of the joining socket on the pump.
1.2.
Unscrew lower fastening screws -1- and remove the tandem pump -3-.
Installing vacuum pump - up to 2008 model
1. Clean contact surfaces on the tandem pump and cylinder head.
2. Replace the sealing ring -3- and grease it before fitting.
Sealing ring on tandem pump
Grease sealing ring with "Kluber Syntheso Glep 1" (Porsche Part No. 000.043.204.68).
3. Install the tandem pump -3-.
Tandem pump on right side of cylinder head
3.1.
Align and insert driver for the tandem pump.
3.2.
Connect the vacuum line -2-.
Tighten screws on the tandem pump -1-.