911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Water Pump: Service and Repair
Removing and installing coolant pump
Preliminary work
1. Remove air cleaner housing.
2. Relieve and remove drive belt.
WARNING: Danger of injury from hot engine parts.
^
Risk of burns, damage to skin, injury to the eyes.
^
Do not work on the engine while it is hot.
WARNING: Coolant is hazardous to health
^
Irritation of skin
^
Wear protective gloves and goggles
^
In case of contact with the skin or eyes, wash immediately with plenty of water!
3. Drain coolant on engine.
4. Remove coolant hose from reservoir to coolant pump -1-. Collect emerging coolant in a clean container.
5. Remove both catalytic converters.
WARNING: Risk of falling engine.
^
Danger of material damage and injury.
^
Support engine at all times.
6. Support engine in installation position with a transmission jack.
7. Remove engine carrier.
Removing coolant pump