911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-259005.png)
-
Chain tensioner on cylinder head, cylinder bank - 6, no identification.
Preliminary work for removing camshafts
1. Remove engine.
2. Remove rear muffler.
3. Remove cover plate for ignition coils -1-. Unscrew two M6 Torx screws and remove cover plate.
4. Remove support for rear muffler. Disconnect cable plugs of ignition coils and magnetic hydraulic valves. Unscrew four Torx screws: intake side
two M8 30, exhaust side two M8 25, remove support.
5. For disassembling cylinder bank -6, undo the ground cable on the cylinder head by unscrewing a Torx screw M8 and removing the cable.
Disconnect two cable plugs from oil pressure switch.
