911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-260004.png)
2. Remove rear muffler.
3. Remove cover plate for ignition coils -1 -. Unscrew two M6 x 16 Torx screws and remove cover plate.
4. Remove support for rear muffler. Disconnect cable plugs of ignition coils and magnetic hydraulic valves. Unscrew four Torx screws: intake side
two M8 x 30, exhaust side two M8 x 25, remove support.
5. For disassembling cylinder bank 4 - 6, undo the ground cable on the cylinder head by unscrewing a Torx screw M8 and removing the cable.
Disconnect two cable plugs from oil pressure switch.
6. Remove ignition coils -1-. In each case unscrew two Torx socket screws M6 x 25 and pull the ignition coils out of the spark-plug recess.
7. Remove solenoid hydraulic valves -2- (NVS and VHS).
8. Remove spark plugs.