911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Preliminary work for bearing cover for intermediate shaft
Note: Note the work instructions for disconnecting and reconnecting the battery.
1. Disconnect the battery.
2. Drain engine oil.
3. Remove air cleaner housing.
Tiptronic transmission:
4. Remove engine.
5. Remove Tiptronic transmission.
6. Remove drive plate for converter.
Manual transmission:
7. Remove manual transmission.
8. Remove clutch.
9. Remove double-mass flywheel.
Removing bearing cover for intermediate shaft - up to engine number 695 07 475
ATTENTION: Timing chain may jump over.
^
Risk of engine damage
^
Following removal of the chain tensioner, the crankshaft must not be turned under any circumstances.