911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
9. Remove oil guide on gear carrier. Unscrew six M6 Torx screws -1- and remove guide with seals.
Removing crankshaft
ATTENTION: Engine damage due to incorrect allocation of connecting rod and connecting rod cap
^
Remove connecting rods one-by-one
^
When disassembling connecting rod cap, allocate it immediately to associated connecting rod
^
Mark installation position and cylinder allocation on connecting rod and connecting rod cap, using an electric engraver, for example
^
Do not use prick punches or number embossing tools
Gear carrier components overview with crankshaft