911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-274001.png)
Crankshaft Main Bearing: Specifications
Crankshaft Main Bearing
Position 14 M9 127 thrust-bearing screws manually. Pre-tighten screws to the required tightening torque in accordance with the tightening sequence.
Then tighten to the required torque angle.
Initial tightening: ............................................................................................................................................................................. 15 (11 ft. lb.) Nm
Torque angle: ....................................................................................................................................................................................................... 120°
Crankcase half
Tighten all screws in the cross bolt connection to the required torque in accordance with the specified tightening sequence.
Tightening Torque: ............................................................................................................................................................................................. 9.5 ft. lb.
