911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
the oil pan.
40. Align piston and connecting rod again using the centering mandrel 9608 before fitting the piston pins.
41. Insert piston-pin circlip into the assembly tube of the special tool assembly tool 9602/1. Insert the lug of the circlip so that it is aligned to the right
in the groove.
42. Insert pressure pin -1- carefully into assembly tube -2-, ensuring that the circlip does not pop out.
43. Oil piston pin -3- with new engine oil and place it in an upright position on a clean surface on the workbench. Position assembly tube with circlip