911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
52. Fit the piston-pin circlip for cylinder 5 using a sleeve.
53. Push two spacer sleeve onto the assembly tube for the assembly of pistons pins and circlip on cylinder 4.
54. Fit the piston-pin circlip for cylinder 4 using two sleeves.
55. Once the pistons have been installed, seal the bore for the piston pin and circlip assembly on the crankcase using the aluminum screw plug and
new sealing ring. Tightening torque 59 ft. lbs.
Installing pistons, touching up
1. Assemble engine.