911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-283019.png)
Note: Leave the centring mandrel in the eye of the connecting rod until the relevant piston (4-6) contacts the centring mandrel during assembly.
35. Align connecting rod using the centring mandrel 9608
36. Coat cylinder bore with new engine oil. Place piston 6 on cylinder bore 6 using the universal piston ring restraining strap, 75-125 mm NR.55.
37. Pay attention to direction of assembly: arrow on piston crown always points to flywheel side
