911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Spark Plug: Removal and Replacement
Removing And Installing Spark Plugs
Tools
Tools
Preliminary work
NOTE: To remove and install the wheel bolts use the prescribed special tool socket wrench insert 300.
1. Remove rear wheels.
Removing
Removing spark plugs
1. Remove the 2 M6 x 20 fastening screws -arrows- for the shields on both cylinder heads and remove the plates.
2. Unplug cable plug for the ignition coils. To do this, slide the rubber grommets upward first. Press locking tabs on the respective ignition coil and
pull off the individual plugs. In the interest of better accessibility, unplug the cable plugs for the solenoid hydraulic valves.