911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
2. Align tailpipe with respect to the rear apron.
-
Distance from inside of rear apron: at least 22 mm
-
Upper edge of tailpipe flush with rear apron -A-.
If the engine mountings (hydraulic mount) are replaced, the installation dimensions will change as follows due to the shifting behavior of the
mountings:
-
Distance from back of rear apron: 25.5 mm
-
Distance from inside of rear apron: 19.5 mm
Installing tailpipe -3.8 l
NOTE: Observe specified dimensions for installation position with respect to rear apron.
1. Align tailpipe with respect to the rear apron.
-
Distance from back of rear apron: 28 mm -B-
-
Distance from side of rear apron: 29 mm -A-
2. Align tailpipe with respect to the inside of the rear apron.
-
Distance from inside of rear apron: at least 22 mm
-
Upper edge of tailpipe flush with rear apron -A-.
If the engine mountings (hydraulic mount) are replaced, the installation dimensions will change as follows due to the shifting behavior of the
mountings: