911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-870011.png)
Preliminary work
Preliminary work on compressor-condenser line
Drain refrigerant.
Remove drive belt
Unscrew compressor from engine block.
Removing compressor-condenser line
INFORMATION:
-
Close off all lines and connections using suitable plugs during removal.
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
1. Unscrew the fastening screw -2- on the compressor.