porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Driver/Vehicle Information Display|Testing and Inspection|Page 6363 > < Procedures|Page 6359
Page 1
background image

Driver/Vehicle Information Display: Testing and Inspection

Eliminating Noise Symptoms - Reworking PCM And Air-conditioning System Regulator

General information

Symptoms

Creaking/clicking noises from around the PCM/air-conditioning system regulator.

Causes and remedial action

Relative movements between the PCM/air-conditioning system regulator and the basic centre console carrier at the front can cause creaking/clicking
noises while driving.

If a complaint is received, tricot tape or transparent Teflon tape must be affixed to the PCM/air-conditioning system regulator to remedy the situation on
vehicles manufactured before the specified date of introduction March 2006.

Dates of Introduction

Up to Vehicle Ident. Nos.:

Model

99 Z6S 73 6579

Carrera/RoW

99 86S 71 7001

Carrera/USA

99 66S 74 3285

Carrera S/USA

Tools and materials

999.551.127.40 Tricot tape - Adhesive tape
000.043.204.83 Teflon tape - Adhesive tape

Preliminary work

1. Remove PCM.
2. Remove air-conditioning system regulator.

Reworking PCM and air-conditioning system regulator

1. Remedial action 1

1.1. Cut a strip of tricot tape approx. 200 mm long.
1.2. Cut two strips of tricot tape each approx. 85 mm long.
1.3. Stick tricot tape -1- on the PCM flange -2- at the top and bottom.

1.4. Cut two strips of Teflon tape measuring 50 and 60 mm long.
1.5. Stick Teflon tape -1- on the two PCM guide cams -2- at the left and right.

Driver/Vehicle Information Display|Testing and Inspection|Page 6363 > < Procedures|Page 6359