911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Interior light overview
Installing interior light
1. Connect plug for interior light until the plug engages perceptibly.
2. Insert interior light into the trim panel at the rear, then press it into the trim panel at the front.
Removing and Installing Footwell Light
961519 Removing And Installing Footwell Light
Removing footwell light
ATTENTION:
Danger of damage to property if bulbs are used or handled incorrectly.
-
Risk of damage to bulbs and bulb housing.
-
Switch off ignition and remove ignition key.
-
To prevent short circuits, the load in question must be switched off while changing bulbs.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing
bulbs.
-
In certain states, it is compulsory to carry spare light bulbs.