911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-1233002.png)
Fastening screws
2. Unscrew the six fastening screws.
Electronic unit
3. Turn the steering column switch round and remove the electronic unit -E-.
GRA switch
4. Pull the GRA switch -B- downward and disengage.
Switch for wiper and washer system
5. Pull switch for wiper and washer system -D- up and out of the mount.
Assembling steering column switch
WARNING:
Risk of damage to airbag contact unit.
-
If the contact unit has been adjusted, proceed in accordance with the following work instruction:
-
To position the airbag contact unit in the central position, press the locking element and turn the rotor carefully to the left as far as it will go.
-
Then turn the rotor carefully to the right, approx. 3.5 to 3.75 revolutions, until the locking element engages. The rotor arrow marking must be
positioned between the arrow markings of the contact unit
Switch for wiper and washer system
1. Insert switch for wiper and washer system -D- into the mount.
