911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
2. Place retaining brackets on the body and screw down with the four fastening screws -4- and the fastening nut -5-. - Tightening torque: 2.2 Nm (1.5
ftlb.) - Tightening torque: 4.5 Nm (3.5 ftlb.)
Installing relay carrier for cabriolet
1. Push and engage the relay carrier into its retaining frame.
2. Push motor for convertible top compartment lid together with potentiometer onto the bracket and screw tight with the fastening nuts -1-. -
Tightening torque: 10 Nm (7.5 ftlb.)
3. Plug in the electric plug connection for potentiometer -2- at control unit until the connector is felt to engage.
4. Plug in the electric plug connection for microswitch -5- and engage on the bracket.
Subsequent work