911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-165009.png)
Preliminary work
Preliminary work on compressor/evaporator line
Drain refrigerant.
Remove drive belt.
Unscrew compressor from engine block.
Removing compressor/evaporator line
INFORMATION:
-
Close off all lines and connections using suitable plugs during removal.
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
1. Unscrew the fastening screw -1- on the compressor.
