911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
ATTENTION: Incorrect tool for changing the spark plugs.
-
Ceramic body breaks.
-
Only use the approved tool spark plug socket wrench NR.14 and 3/8 inch extension, 16 degree moveable NR.15.
1. Install spark plug with spark plug socket wrench NR.14 and 3/8 inch extension, 16 degree movable NR.15. Tightening torque 22 ftlb.. If the spark
plugs will be removed and installed again for another activity, the tightening torque is reduced. Tightening torque 19 ftlb..
2. Insert ignition coils in the spark-plug recesses and tighten using two M6 x 25 fastening screws each. Tightening torque 7.5 ftlb.. Then connect the
cable plug and position the rubber grommet on the coils.
3. Insert the shield again and fit using two fastening screws. Tightening torque 7.5 ftlb..
Subsequent work
Reworking
NOTE: To remove and install the wheel bolts use the prescribed special tool socket wrench insert 300.
1. Mount rear wheels.