911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1. Disengage electric plug connection for microswitch -5- on holder, release -A- and disconnect
2. Loosen the two fastening nuts -1-, release electric plug connection -2- and unplug from control unit.
3. Remove motor together with drive to the rear out the bracket.
4. Release both locking hooks and pull the relay carrier up and out of the retaining frame.
Installing relay carrier
1. Engage relay carrier on retaining bracket and screw down with the two fastening screws -1-. - Tightening torque: 4.5 Nm (3.5 ftlb.)