911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-755006.png)
1. Release and disconnect plug connection for main wire harness to wire harness for door -3 and 4-.
2. Cut and remove tie-wrap for fixing the wire harness to the connector housing.
3. Release cap on both sides -arrow a- and remove from the connector housing.
4. Release locking mechanism on connector housing with a small screwdriver -arrow A- and remove -arrow B-.
5. Remove connector from connector housing -arrow C-.
6. Release connector guide on both sides -arrow a- and remove from the contact strip.
INFORMATION: Allocation of lines - see wiring diagram.
