porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3630 > < Procedures|Page 3628
Page 34
background image

12. Connect plug connection of make-up mirror, left and right -87 and 88-.

12.1. Connect plug connection -arrows A- until it engages securely.
12.2. Clip plug connection into console -arrow B-.

13. Connect plug connection -86- until it engages securely.

14. Connect plug connections between main wire harness and wire harness for heater/air-conditioning unit -79 and 80-.

14.1. Lay main wire harness to heater/air-conditioning unit wire harness and fix with a tie-wrap.

14.2. Push in upper electric plug connection at heater/air-conditioning unit until it engages securely.

14.3. Push in lower electric plug connection at heater/air-conditioning unit until it is felt to engage.

15. Push on connector for tilt sensor control unit -77- until it engages securely.

16. Fasten ground point under the unit carrier -76-.

16.1. Connect ground straps and tighten with the fastening nut.

17. Push on connector for pedal sensor -69- until it engages securely.
18. Push on connector for brake light switch -68- until it engages securely.
19. Push on connectors of KESSY/PAS control unit -66 and 67- until they engage securely.
20. Push on connector on Gateway control unit -65- until it engages securely.

Procedures|Page 3630 > < Procedures|Page 3628