porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3637 > < Procedures|Page 3635
Page 41
background image

14. Install tank for windscreen washer system.
15. Install front cover.
16. Install front wheel housing liner on left and right.
17. Install front-end control unit.
18. Install trim panels for luggage compartment.
19. Install loudspeaker amplifier.
20. Install navigation unit with retaining frame.
21. Install CD changer.
22. Install plenum panel cover.
23. Install battery.

Removing and Installing Rear Wire Harness

Removing And Installing Rear Wire Harness

Tools

Technical values

Preliminary work

1. Disconnect battery.
2. Remove front seat at left and right.
3. Remove left and right scuff plate.
4. Remove rear side trim panel at left and right.

INFORMATION:  Only in the coupe.

5. Remove C-pillar trim panel.
6. Removing rear wall trim panel
7. Remove trim panel for seat well.
8. Remove relay carrier.

INFORMATION:  Only in the cabriolet.

9. Remove frame for roll-over protection system.

INFORMATION:  Only in the cabriolet.

10. Remove rear window lifter.

Procedures|Page 3637 > < Procedures|Page 3635