911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
6. Disconnect PASM plug connection -9- at left and right.
6.1. Release and disconnect PASM plug connection -9- ( -arrow a- ).
7. Release and pull off connector on subwoofer -10-
8. Release and pull off connector on wiper motor for rear window washer -12-.
9. Loosen ground point -13- at left and right.
9.1. Screw off fastening nut and remove ground straps.
10. Unclip cable duct -29-.
11. Unclip tie-wrap -31-
12. Release and disconnect plug connection for oxygen sensor -16- at left and right.
13. Release and disconnect plug connection on rear lock lower part -17-.
14. Release and pull off connector on motor for rear lid release -18-.
15. Release and disconnect plug connection for rear wire harness to wire harness for rear lid -22-.
16. Disconnect plug connection for rear wire harness to engine wire harness -23-.
16.1. Release rear wire harness at the two plug connections and disconnect it by turning the bayonet locks anti-clockwise.
17. Disconnect plug on angle sensor for HBA at rear left -24-.
17.1. Release and pull off connector on angle sensor for HBA at rear left -24-.
17.2. Remove rubber sleeve -30-.
18. Disconnect plug connection for rear wheel sensor -25- at left and right.