911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1. Attach the connectors to the four Park Assist sensors until they are felt to engage.
2. Insert the connectors for the two number plate lights until they are felt to engage.
3. Insert the wiring harness for the number plate light into the four line holders.
Subsequent work
Install the rear apron.
Removing and Installing Wiring Harness For Rear Spoiler
Removing And Installing Wiring Harness For Rear Spoiler
Information
Note on removing and installing wiring harness for rear spoiler
INFORMATION:
-
The wire harness for rear spoiler is not available as spare part.
-
If the wire harness for the rear spoiler must be replaced, this is only possible together with the spoiler drive.
Replacing Wire Harness For Anti-Lock Brake System (ABS)
Replacing Wire Harness For Anti-lock Brake System (ABS)
Tools