porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Wiring Harness|Testing and Inspection|Page 3591 > < Power Interrupt Connector/Switch|Service and Repair|Page 3587
Page 1
background image

Wiring Harness: Testing and Inspection

Eliminating Noise Symptoms - Reworking Wire Harness For Battery Wiring (Clicking Noise From Fuel Injectors)

Technical values

General information

Symptom

Clicking noises (fuel injectors) when the engine is warm and cold.

Causes and remedial action

The ground strap is touching the valve cover and transmits the fuel injector noises to the passenger compartment when the engine is warm and cold.

In the event of a complaint, the ground strap must be fitted in the bracket for the valve cover on vehicles manufactured before the date of introduction
February 2008.

Preliminary work

Preliminary work for engine ground strap

1. Lift the vehicle.

Reworking wire harness for battery wiring

Reworking ground strap on engine

WARNING:
Engine is hot.
-

Danger of burns.
-

Only work on engine when it is cold.

-

Wear protective clothes, gloves and goggles.

Wiring Harness|Testing and Inspection|Page 3591 > < Power Interrupt Connector/Switch|Service and Repair|Page 3587