911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-451002.png)
Knock Sensor
1. Clean contact surface on crankcase and move knock sensor to the installation position, according to removal position. Position and tighten
fastening screw -2-. Tightening torque 17 ftlb..
2. Push on cable plug.
Subsequent work
Work subsequent to installing knock sensor
1. Install three-phase generator on cylinder bank 1-3.
2. Install oil separator on cylinder bank 4-6.
