911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Variable Valve Timing Solenoid: Removal and Replacement
Removing and installing solenoid hydraulic valve (camshaft timing)
Tools
Removing hydraulic valve for camshaft timing
ATTENTION: Risk of oil contamination and blocked oil bores
^
Faulty engine parts, engine damage
^
Absolute cleanliness is essential when working on hydraulic valves.
Note: The rear silencer must be removed and the holder must be detached before the hydraulic valve on cylinder side - 6 can be removed.
1. Cylinder side - 6 only: Remove rear silencer.
2. Cylinder side - 6 only: Remove holder for rear silencer. Unscrew two M8 30 Torx screws on the intake side and two M8 25 screws on the exhaust
side and remove the holder.