911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
11. Remove both side fastening screws -arrows-.
12. Carefully turn the oil separator and pull it out of the bore. Check sealing rings and replace if necessary -arrow-.
13. Remove connections to the oil separator . For this purpose, place a cloth underneath as coolant emerges from the bottom vent line. Press and
remove the connections -arrows-. Remove oil separator from the engine compartment.
Installing oil separator
1. Check seals of oil separator and replace if necessary. Place oil separator in the installation position and make all connections -arrows-.