911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-477003.png)
10. Release tuning pipe. To do this, mark the installation position of the tuning pipe and loosen screw-type hose clamps-arrows-.
11. Remove both side fastening screws -arrows-.
12. Carefully turn the oil separator and pull it out of the bore. Check sealing rings and replace if necessary -arrow-.
13. Remove connections to the oil separator. For this purpose, place a cloth underneath as coolant emerges from the bottom vent line. Press and
