911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-477004.png)
remove the connections -arrows-. Remove oil separator from the engine compartment.
Installing oil separator
1. Check seals of oil separator and replace if necessary. Place oil separator in the installation position and make all connections -arrows-.
2. Lightly coat the sealing rings to the crankcase with Optimol MP3 -arrow-. Carefully turn the oil separator and press it into the bore of the
crankcase.
3. Fit both side fastening screws -arrows-.
