911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-519003.png)
5. Unlock and disconnect the electrical plug connection.
6. Disengage retaining clip -4-.
7. Pull control unit out of the support and pull it down and out at an angle.
8. Press locking tabs -A- and disconnect plug connections from the control unit.
Installing Tiptronic control unit (also referred to generally as central unit below)
WARNING: Sudden voltage interruption of the power supply to the control module.
^
Destruction of the control module.
^
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
^
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
1. Switch ignition off and remove ignition key.
